Fuel Events

The Fuel Events is a list of fuel events that are recorded in the controller memory on units equipped with the fuel level sensor option. An example of a recorded event is when fuel is added to the fuel tank. Fuel Events are listed in the reverse order of their occurrence.

Note Only applies to gensets with the standard ultrasonic fuel sensor connected directly to the SG+1.5 controller, for gensets equipped with telematics fuel level sensor option needs to be set to NO.
Note The Fuel Events will log 128 events. When full, the controller uses a first in first out overwriting of events.

To enter the Fuel Events submenu complete the following steps:

  1. Place the On/Off switch in the “ON” position.

  2. Press the ENTER key or the ESCAPE key to enter the Main Menu, if necessary.

  3. Press the UP or DOWN key to scroll up or down through the Main Menu to the Event Log Menu.

  4. Press the ENTER key to enter the Event Log Menu.

  5. The Event Log submenu will be displayed.

  6. Press the UP or DOWN key to scroll up or down to the Fuel Events submenu.

  7. Press the ENTER key to enter the Fuel Events submenu.

  8. The Fuel Events will appear on the display. It shows the most recent fuel event and the date and time of that event.

  9. Press the DOWN key to scroll down to the next fuel event.

  10. Press the UP or DOWN key to scroll up or down through the fuel events.

  11. Press the ESCAPE key to return to the Event Log Menu.

Parent topic: Event Log Menu