Message List Menu SG+ 1.5

The Message List Menu displays messages. Messages are recorded in the controller memory to simplify unit diagnostic procedures. The messages are listed in the reverse order of their occurrence. Enter the Message List Menu to view the and acknowledge the messages. Acknowledging a message clears it from the list.

Note The unit will not start a PTI until all active messages have been acknowledged. The display will show “ACKNOWLEDGE MESSAGE” if there are messages that have not been acknowledged when trying to start a PTI.

Parent topic: SG+ 1.5 Operating Instructions

Displaying and Acknowledging Messages

Enter the Message List Menu to view and acknowledge the messages as follows:

  1. Place the On/Off switch in the “ON” position.

  2. Press the ENTER key or the ESCAPE key to enter the Main Menu, if necessary.

  3. Press the UP or DOWN key to scroll up or down through the Main Menu to the Message List Menu.

  4. Press the ENTER key to enter the Message List Menu.

  5. The Message List Menu will appear on the display. It shows the most recent message and the following information:

    • The message code (109 through 803).

    • The position of the message in the list of recorded messages. For example, 1/1 means message one of one.

    • The message text.

    • The message status (Active or Acknowledged).

  6. Write down the message code and the message text.

  7. Press the ENTER key to acknowledge the message. The Alarm LED will continue flashing until the active messages (and alarms) have been acknowledged.

  8. Press the DOWN key to scroll down to the next message, if necessary.

  9. Write down the message code and the message text.

  10. Press the ENTER key to acknowledge the message.

  11. Repeat steps 8 through 10 until all active messages have been written down and acknowledged.

  12. Press the ESCAPE key to return to the Main Menu.

  13. The unit will then enter the Start Sequence and start the engine.