Timers

The Timers submenu displays the following hour meters:

  • Run Hours – The number of hours the unit has been running.

  • Engine Off Hours – The number of hours the unit has been running since Engine Off Hours was cleared. An alarm is generated when the reading reaches the threshold set in the Configuration Menu.

  • Engine Run Hours Low Speed – The number of hours the unit has been running at 50 Hz (low speed).

  • Engine Run Hours High Speed – The number of hours the unit has been running at 60 Hz (high speed).

  • Hour Meter 1 – The number of hours the unit has been running since Hour Meter 1 was cleared. A message is generated when the reading reaches the threshold set in the Configuration Menu.

  • Hour Meter 2 – The number of hours the unit has been running since Hour Meter 2 was cleared. A message is generated when the reading reaches the threshold set in the Configuration Menu.

Note The readings for Run Hours, Run Hours 50 Hz, and Run Hours 60 Hz can be adjusted. See “Setting Hour Meter Thresholds and Resetting Hour Meters” .

To enter the Timers submenu complete the following steps:

  1. Place the On/Off switch in the “ON” position.

  2. Press the ENTER key or the ESCAPE key to enter the Main Menu, if necessary.

  3. Press the UP or DOWN key to scroll up or down through the Main Menu to the Misc. Functions Menu.

  4. Press the ENTER key to enter the Misc. Functions Menu.

  5. Press the UP or DOWN key to scroll up or down through the Misc. Functions Menu to the Timers/Counters submenu.

  6. Press the ENTER key to enter the Timers submenu.

    • Press the UP or DOWN key to scroll up or down through the Timers.

    • Press the ESCAPE key to return to the Misc. Functions Menu.

Parent topic: Misc. Functions Menu