Setting Hour Meter Thresholds and Resetting Hour Meters
The Hour Meter Threshold feature sets the controller to alert the user that the unit has operated for a defined number of hours. The number of operating hours are entered in the controller in the Hour Meter Threshold display. The controller then generates a message when the hour meter reaches the threshold setting.
The readings for Run Hours, Run Hours 50 Hz, and Run Hours 60 Hz can be adjusted.
To set the HM1 Threshold or the HM2 Threshold, or to reset Run Hours, Run Hours 50 Hz, or Run Hours 60 Hz, complete the following steps.
-
Place the On/Off switch in the “ON” position.
-
Press the ENTER key or the ESCAPE key to enter the Main Menu, if necessary.
-
Press the UP or DOWN key to scroll up or down through the Main Menu to the Configuration Menu.
-
Press the UP or DOWN key to scroll up or down through the Configuration Menu to the Option Configuration menu.
-
Press the ENTER key to enter the Option Configuration menu.
-
The Option Configuration menu will be displayed.
-
Press the UP or DOWN key to scroll up or down through the Option Configuration menu to HM1 Threshold and HM2 Threshold.
-
Press the ENTER key to select HM1 or HM2. Use the ENTER and UP or DOWN keys to set the desired hour interval.
Note For example, to change the setting for the HM1 Threshold to 400 hours, press the ENTER key until the cursor is under the third digit from the right. Then press the UP key until that value reads 4. -
Press the UP or DOWN key to scroll the selected value up or down to the new setting.
-
Repeat steps 8 and 9 until you have changed all the values to the new settings.
-
Press the ESCAPE key and the ENTER key at the same time to save the new settings and return to the Option Configuration menu.