Commands Menu

The Commands Menu contains the following submenus that are used to test the operation or the unit and controller:

• PTI (Pretrip Inspection Test)

• Manual Function Test

• Speed Control

To enter the Commands Menu complete the following steps:

1. Place the On/Off switch in the “ON” position.

2. Press the ENTER key or the ESCAPE key to enter the Main Menu, if necessary.

3. Press the UP or DOWN key to scroll up or down through the Main Menu to the Commands Menu.

4. Press the ENTER key to enter the Commands Menu.

5. The PTI submenu will be displayed.

   • Press the ENTER key to start the PTI.

   • Press the UP or DOWN key to scroll up or down through the Commands Menu.

   • Press the ESCAPE key to return to the Main Menu.