Controls

The Controls submenu is used to temporary set engine RPM to AUTO / HIGH / LOW for service purposes. To enger the Controls submenu, complete the flowing steps:

  1. Place the On/Off switch in the “ON” position.

  2. Press the ENTER key or the ESCAPE key to enter the Main Menu, if necessary.

  3. Press the UP or DOWN key to scroll up or down through the Main Menu to the CONFIGURATION Menu.

  4. Press the ENTER key to enter the CONFIGURATION Menu.

  5. Press the UP or DOWN key to scroll up or down through the CONFIGURATIONS submenu to the CONTROLS submenu.

  6. Press the ENTER key to enter the CONTROLS submenu.

  7. Press the ENTER key again to enable CONTROL setting changes.

  8. Press the UP or DOWN key to the change the setting between AUTO, HIGH, and LOW.

  9. Press the ESCAPE key and the ENTER key at the same time to save the new settings and return to the System Setup submenu.

    Note Press the ESCAPE key to return to the Misc. Functions submenu without saving the new settings.

Parent topic: Configuration Menu