SGSM Typical Unit Installation

  1. Attach the mounting arm assemblies on each end of the unit. Two sets of mounting bolt holes are provided on the mounting arms.

    Note The clear insulator pad should be located between the steel mounting arms and the inside of the unit frame members. The stainless steel plate should be placed on the outside of the unit frame members.

  2. Move the unit under container or trailer chassis. Place each mounting channel on top of a chassis frame member. Locate each channel as close to the vertical web of the chassis member as possible.

      Caution
    • Service Procedures
    • Keep all container or trailer electrical lines and air lines away from the channel to prevent damage during unit installation and operation.

  3. Torque the mounting bolts:

    • Mounting Arm to Unit Frame: 203 Nm (150 ft-lb)

    1. Mounting Arm Tube and Channel Assembly
    2. Unit Mounting Bracket Assembly

Parent topic: Structural/Accessory Maintenance