Speed Control

Speed control is used to temporarily set engine speed (either high or low speed) to aid in unit testing for 180 seconds. After 180 seconds the unit will return to normal operating RPM and the controller will exit to the main menu.

  • HIGH

  • LOW

  1. Place the On/Off switch in the “ON” position.

  2. Press the ENTER key or the ESCAPE key to enter the Main Menu, if necessary.

  3. Press the UP or DOWN key to scroll up or down through the Main Menu to the Commands Menu.

  4. Press the ENTER key to enter the Speed Control menu.

  5. Press the UP or DOWN key to scroll up or down between HIGH rpm and LOW rpm.

  6. Press the ESCAPE key to return to the Commands Menu.

    Parent topic: Commands Menu