Fuel Filter/Water Separator Replacement

Replace the fuel filter/water separator at intervals according to the Maintenance Inspection Schedule.

1. Unscrew the fuel filter/water separator canister with a strap wrench. Drain, and dispose of properly.

2. Clean the filter head seal surface.

3. Lubricate the canister seal with clean fuel.

4. Through one of the small openings in the top of the canister, fill the new fuel filter/water separator canister with clean fuel. This will purge the air from the canister. Do not fill canister through the center hole.

   Filling Fuel Filter/Water Separator

   Open

   1.	Fill Through Small Openings
   2.	Do Not Fill Through Center Hole

5. Screw the new canister on hand-tight. Using a strap wrench, tighten another 1/4 turn.