USB Copy Event Log

The USB Copy Event Log is a function that allows the download of all logged events onto a USB drive located on the controller board.

Format USB drive to Fat 32 system. Use a blank USB drive.

Note A Logman II PC 2.8.1 can also be used to download the log.

To enter the USB Copy Event Log submenu and complete ad download, complete the following steps:

  1. Place the On/Off switch in the “ON” position.

  2. Press the ESCAPE key to enter the Main Menu, if necessary.

  3. Press the UP or DOWN key to scroll up or down through the Main Menu to the Event Log Menu.

  4. Press the ENTER key to enter the Event Log Menu.

  5. The Event Log submenu will be displayed.

  6. Press the UP or DOWN key to scroll up or down to the USB Copy Event Log submenu.

  7. Press the ENTER key to enter the USB Copy Event Log submenu.

  8. Press ENTER to generate log file.

  9. Wait for display to show !!DONE!!.

  10. Turn genset OFF, insert USB drive, turn genset ON.

  11. DO NOT turn genset OFF until it starts to count down on the display.

  12. Turn genset OFF and remove USB drive.

  13. Log files are saved.

Parent topic: Event Log Menu