Log View Menu

This menu allows the user to check Display log information, PTI, and Runtime logs. Displays results of last logs with its time, PTI logs, and Run time hours for Compressor, Heating elements, Evaporator fan high/low speed, Condenser fan, and Main power on.

A complete listing of the controller operating menu is located on an 11” x 17” foldout in the Diagrams chapter (Diagram Index).

With the unit turned On, allow it to start and stabilize and the display showing the unit status display (setpoint):

  1. Press the Enter key access Menu view. Press the Down key to scroll down to the Log View menu.

  2. Press the Enter key to access the Log View menu.

  3. Press the Up or Down key to scroll to the desired function.

  4. Press the Enter key to access the function selected.
   

    Note

  • In Display Logs, "NO LOGS" appears only when there is no display log condition and a maximum of 20 logs can be shown.

  • In PTI, “NO LOGS WITHIN RANGE" appears only when there is no PTI log condition, and a maximum of 40 logs can be displayed.

Parent topic: Main Menu