Unit Start-Up

  1. Connect unit to high voltage power (360V or 440V) at vessel, shore or genset.

  2. Turn circuit breaker on at post to apply power to unit.

  3. Toggle switch to On position (ensure main circuit breaks inside control box is in On position).

  4. Long press the Enter key to turn on the unit. Press the key until the THERMO KING logo is initialized by the display. The display will show the PowerUp message after 5 seconds.

    Enter Key to On the Unit

    Start-up Screen

    PowerUp Message

    The standard display will display:

    • Date and Time / Alarm Warning

    • Mode Icons Compressor ON, Heater ON, Evap Fan ON

    • SP Setpoint

    • SA Supply air sensor

    • RA Return air sensor

    • Mode Description unit operation

    • Capacity Bar Graph Percentage of mode (100% is full)

Parent topic: Operating Instructions