If Log Alarms are Present
Log Alarms are indicated for 30 seconds each time the unit is turned on. This level of alarm serves as a notice to take corrective action before a problem becomes severe. Maintenance items such as maintenance hourmeter time-outs are log alarms. The TemperatureWatch screen is not disabled if only log alarm(s) are active.
If log alarm(s) are present, the Log Alarm notice shown ( Log Alarms Active) will appear on the display for 30 seconds. The remote indicator alarm light (if installed) will also be on during this period. After 30 seconds the Standard Display will appear and the remote indicator alarm light will go off. Pressing the EXIT soft key ( Log Alarms Active) will return to the Standard Display immediately.
When the unit is ready to run, the Standard Display appears ( Standard Display).