Flashloading the controller

  1. Download the DSE Assistant program and controller firmware from Global Marine Solution Info Central site. Install the DSE Assistant on your PC. Create a DSE Controller Firmware fold under My Document, place the controller firmware in the folder.

  2. Connect the module to the PC using a USB to USB cable

    Start the DSE Assistant program and select the Connection to be USB connection from the drop box.

  3. Select Load from disk and locate the controller software under DSE Controller Firmware folder

  4. Select Open and the Write config to module will show active, click on to start the flashload

  5. Program will show Writing Configuration progress

Parent topic: Operating Instructions