Controller Display Menu

Note The Data Menu only displays information, items can NOT be changed.

User to be able to Cycle through the top-level tab structure using the ←/→ arrows and view the displayed information by using the ↑ / ↓ arrows

The Data tab displays general unit operating information including electrical data, temperatures, etc. It contains the following submenus:

  • Status

  • Engine

  • Generator

  • Alarms

  • ECU Current DTC’s

  • Event Log

  • Serial Port

  • Genset Information

  • PLC instruments

  • About

Parent topic: Operating Instructions

Status

Displays a summary of electrical output

These lines are not ‘selectable ‘. Data is readable only

Status tab submenu information:

  • On Load

  • Voltage

  • Frequency

Engine

Displays Engine and System information and status

User to be able to Cycle through the menu using the ↑ / ↓

These lines are not ‘selectable ‘. Data is readable only

Engine tab submenu information:

  • Engine Speed

  • Coolant Temperature

  • Battery Voltage

  • Engine Run Time

  • WiF Status

  • Engine percentage load

  • Engine Link

  • Can bus information

Generator

The Generator submenu display the status of the following outputs:

Displays Generator information, status and configuration

User to be able to Cycle through the menu using the ↑ / ↓

These lines are not ‘selectable ‘. Data is readable only

Generator tab submenu information:

  • Generator Voltage

  • Generator Frequency

  • Generator Phase Sequence

  • Active Configuration (Volts)

Alarms

Displays a list of the current logged alarms

User to be able to Cycle through the menu using the ↑ / ↓

These lines are not ‘selectable ‘. Data is readable only

The Alarm List Menu displays alarms. Alarms are recorded in the controller memory to simplify unit diagnostic procedures. The alarms are listed in the reverse order of their occurrence.

Active ECU DTC’s Menu

Displays a list of the current logged Engine Diagnostic Trouble Codes

User to be able to Cycle through the menu using the ↑ / ↓

These lines are not ‘selectable ‘. Data is readable only

Event Log

Displays the unit event log

User to be able to Cycle through the menu using the ↑ / ↓

These lines are not ‘selectable ‘. Data is readable only

Serial Port Menu

Displays Serial Port information and condition

User to be able to Cycle through the menu using the ↑ / ↓

These lines are not ‘selectable ‘. Data is readable only

Genset Data Menu and Config Details

Displays System Configuration

User to be able to Cycle through the menu using the ↑ / ↓

Allows the user to specify / modify various system conditions.  All data is manually entered

PLC Instrumentation

Displays PLC Settings and condition

User to be able to Cycle through the menu using the ↑ / ↓

These lines are not ‘selectable ‘. Data is readable only

  • Restart Timer

    • Timer Countdown

    • Timer Total (Default 20)

  • Low Speed Hours

  • High Speed Hours

  • Restart Attempts

    • Restarts attempted

    • Restart total (Default 3)

About

Displays Software information and revision.

User to be able to Cycle through the menu using the ↑ / ↓

These lines are not ‘selectable ‘. Data is readable only

  • Variant Version

  • Application Version

  • USB ID

  • Bootloader Version

  • Analogue Version

  • Engine Type

  • Version