Genset Battery Charger Specification
I/O Descriptions
AC Input
Voltage supplied to the charger will be:
AC Frequency will change depending on load demand on the engine. At low load, it will be 50Hz. At High load it will be 60Hz
Will operate in the voltage range of 200 VAC 50 Hz/ 230 VAC 60 Hz.
Battery Charge Current
The charger will be capable of bulk charging the battery at 19 Amps
Battery Charge Voltage
The charger will be used with lead acid batteries with a nominal operating voltage of 14.1 volts. The charger will be capable of charging nearly discharged batteries.