Fuel Priming

Fuel Priming is typically used when changing the fuel filters or servicing the fuel system. It turns the fuel pump ON without starting the engine to prime / bleed the fuel system.

After the fuel priming process is complete, turn the unit OFF to exit.

  1. Place the On/Off switch in the “ON” position.

  2. Press the ENTER key or the ESCAPE key to enter the Main Menu, if necessary.

  3. Press the UP or DOWN key to scroll up or down through the Main Menu to the Commands Menu.

  4. Press the ENTER key to enter the Fuel Priming menu.

  5. The fuel priming sequence will begin, the electric fuel pump will run for 120 seconds (2 minutes), but the unit will not start.

  6. View the on screen status. When the fuel priming process is complete. turn the unit switch OFF to exit.

Parent topic: Commands Menu