Engine Lamps

The Engine Lamps submenu displays the following information:

• Amber Lamp on/off (SG 3000e, SG 4000 and SG 5000 Only)

• Stop Lamp on/off (SG 3000e, SG 4000 and SG 5000 Only)

• Wait To Start (SG 3000e, SG 4000 and SG 5000 Only)

  1. DTC Code - DTC codes are the same has the P-codes out of the ECU. The Yanmar Smart Assist Direct (YSAD) diagnostic tool is needed to clear these codes. (SG 4000 and SG 5000 Only)

  2. DTC Code (SG 3000e, SG 4000 and SG 5000 Only)

  3. DTC Code (SG 3000e, SG 4000 and SG 5000 Only)

  4. DTC Code (SG 3000e, SG 4000 and SG 5000 Only)

To enter the Engine Lamps submenu complete the following steps:

1. Place the On/Off switch in the “ON” position.

2. The Data Menu is typically the first menu displayed in the Main Menu.

   Note Press the UP or DOWN key to scroll up or down through the Main Menu to the Data Menu, if necessary.

3. Press the ENTER key to enter the Data Menu.

4. Press the UP or DOWN key to scroll up or down through the Data Menu to the Engine Lamps submenu.

5. Press the ENTER key to enter the Engine Lamps Submenu.

   • Press the UP or DOWN key to scroll up or down through the Engine Lamps submenu.

   • Press the ESCAPE key to return to the Data Menu.