Oil Priming

Oil Priming is typically used when changing the engine oil / filter and cranks the engine without starting to prime oil galleries. The controller has a sequence and count down timers to properly prime the engine.

After the oil priming process is complete, turn the unit OFF to exit.

  1. Place the On/Off switch in the “ON” position.

  2. Press the ENTER key or the ESCAPE key to enter the Main Menu, if necessary.

  3. Press the UP or DOWN key to scroll up or down through the Main Menu to the Commands Menu.

  4. Press the ENTER key to enter the Oil Priming menu.

  5. The oil priming sequence will begin, the engine will crank 3 times for 12 seconds, but the unit will not start.

  6. View the on screen status. When the oil priming process is complete. turn the unit switch OFF to exit.

Parent topic: Commands Menu