TK Batteries HMI Menu
HMI in Shorepower operation
When the unit is connected to shore power and is off (HMI – OFF), in the HMI appears information regarding the status of the battery, showing the messages:
-
bL1, bL2 (Battery life: a parameter from 0 to 100% showing the battery charge)
-
top right of the display an additional icon appears - The Battery Status icon:: when is flashing, the battery is charging, when is solid, the battery is fully charged.
When the unit is connected to shore power and is ON (HMI-ON), the Standard E-200 HMI display (temperatures) is shown, however in the top right of the display an additional icon appears - The Battery Status icon: when this is flashing, the battery is charging, when is solid, the battery is fully charged.
Road Mode
When the unit is OFF (HMI-OFF), and Ignition is OFF, the battery charging is not enabled.
When the unit is ON (HMI-ON), Ignition is ON, no messages regarding the battery status appear in the HMI, but the battery could be charging or discharging.
When unit is OFF (HMI-OFF), but the vehicle Ingnition is ON, the following status messages will now appear in the HMI:
TK Hold-Over Mode
When the IGNITION is OFF and in is NOT connected to Shore Power, is possible to start the unit in HoldOver Mode, this means the power to run the E-200 will come from the TK battery.
If we press HMI –ON, a message bAThOL is shown in HMI. If we don’t do anything, the message will disappear. If we press UP arrow, the BATon message will be shown and the unit will start operation.
The HMI will show this sequence:
