Starting the Unit

Parent topic: Operating Instructions

Engine Operation

  1. Start the vehicle.

  2. Press the On/Off Key located in the HMI. The HMI display will be activated.

  3. Check the setpoint and adjust if necessary.

Electric Standby Operation

  1. Connect the external power supply to the electric power receptacle. Verify the power supply is of the correct voltage and phase for the unit.

    2. Warning
    • Hazardous Voltage
    • In case of outdoor conditions, ensure that the connection is made under safe conditions.

  3. Press the On/Off Key located in the HMI. The HMI display will be activated. The electric symbol will appear on the screen.

  4. Check the setpoint and adjust if necessary.

    Note

  1. Regular monitoring of the unit is recommended, the frequency of this monitoring will depend on the type of cargo.

  2. The operating mode, whether engine-driven or electric standby, is selected automatically. When the unit is connected to an electric power source, engine-driven operation is automatically blocked. If the truck engine is started up while the power cable is still connected to the electrical power source, the unit will continue to operate in electric standby mode and the buzzer will be activated.