Viewing Information Screens

Parent topic: Operating Instructions

Main Menu

From the Standard Display use the Select key to display:

  1. Alarms (if any active).

  2. Evaporator Manual Defrost.

  3. Condenser Manual Defrost (reverse cycle units only).

  4. Temperature Setpoint.

Hourmeter Menu

From the Standard Display press the Select key for three seconds to open the Hourmeter Menu, then use the Select key to display:

Note For units with firmware version 380.03 and earlier: The unit of measurement is tens of hours (e.g., 150 = 1500 hours). For units with firmware version 380.06 and later: The unit of measurement is hours.

  1. HC: Hours remaining to maintenance notice.

  2. tH: The total amount of time the unit has been switched on protecting the load.

  3. CC: Engine driven compressor operating hours.

  4. EC: Electric standby compressor operating hours.

  5. Return to Main Menu.