Safety Decals

Service

The Service decal is located in an appropriate location internally. This decal gives you the information to access/download your unit operator manual, but also the safety icons associated with your unit. These safety icons are directly associated with the information within this chapter. You can see the explanations for these icons starting from the beginning of this chapter.

Note This decal only contains symbols of warning for the service of the unit.

Service Decal

Operation

The Operation decal is located in an appropriate position near your in-cab controller (HMI). This decal gives you the information to access/download your unit operator manual and other supporting documentation and in many supported languages.

Operation Decal

High Voltage

  • In the control box.

  • Located on the Compressor Drive Module - Condenser fan area

High Temperature

This decal used in evaporators ES100 with AC heaters

High Temperature Warning

Condenser and Evaporator Fans

Be aware of the warning nameplates in the following locations:

  • On belt guard

  • On rear of evaporator housing

Fan Warning

Remote Start of the Unit

    Caution
  • Risk of Injury
  • The unit can start and run automatically any time the unit is turned on. Turn the unit On/Off switch Off before doing inspections or working on any part of the unit. Please note that only Qualified and Certified personnel should attempt to service your Thermo King unit.

Decals located behind service door. Decals located on the cover of the electrical box, condenser section.

Unit Auto-start Warning

Refrigerant

Refrigerant Decal is located adjacent to the service ports for charging or recovering the gas, as per the F-Gas regulation.

Refrigerant Decal is located adjacent to the service ports for charging or recovering the gas.

F Gas decal indicates that this equipment Contains fluorinated greenhouse gases.

Type Certification

UNECE R10 decal sample.

UNECE R10 decal sample.

UNECE R10 decal sample.

UNECE R10 decal sample.