Date and Time

The Date/Time submenu is used to set the clock in the controller. To enter the Date/Time submenu and set the clock complete the following steps:

  1. Place the On/Off switch in the “ON” position.

  2. Press the ENTER key or the ESCAPE key to enter the Main Menu, if necessary.

  3. Press the UP or DOWN key to scroll up or down through the Main Menu to the Commands Menu.

  4. Press the ENTER key to enter the Commands Menu.

  5. The PTI submenu will be displayed.

  6. Press the UP or DOWN key to scroll up or down through the Commands Menu to the System Setup submenu.

  7. Press the ENTER key to enter the System Setup submenu.

  8. Press the UP or DOWN key to scroll up or down through the MISC. FUNCTIONS submenu to the Date/Time submenu.

  9. Press the ENTER key to enter the Date/Time submenu to set the clock.

  10. Press the ENTER key to move the cursor (to the right or down at the end of a row) to select the value you want to change.

    Note The ENTER key does not move the cursor to the right in the Time value. You must use the UP or DOWN keys to scroll the total Time value up or down.

  11. Press the UP or DOWN key to scroll the selected value up or down to the new setting.

  12. Repeat steps 10 and 11 until you have changed all the values to the new settings.

  13. Press the ESCAPE key and the ENTER key at the same time to save the new settings and return to the System Setup submenu.

    Note Press the ESCAPE key to return to the Misc. Functions submenu without saving the new settings.

Date / Time

Parent topic: Misc. Functions Menu