Premium HMI Controller
The Premium Truck HMI (Human/Machine Interface) Control Panel is available as an option on TSR-3 Truck applications. It is used to operate the unit, display unit information and access all TSR-3 Maintenance and Guarded Access Menus. The Premium HMI Control Panel communicates with the base controller via the CAN (Controller Area Network) bus. It is connected to the base controller via CAN Connector J14 on the interface board. The Premium HMI Control Panel is typically located in the vehicle driver's compartment. It may be installed in the truck instrument panel using a DIN mounting ring or under the instrument panel using an under dash mounting kit.
Please refer to Profeesor Kool and the “TK Tutor Series” for step by step instructions and training on how to operate your controller and also “TK Alarm Codes” to help diagnose any alarms. These can be found at the following link: http://www.europe.thermoking.com/tools/
Premium HMI Control Panel Display
| Hard Keys (1–4) | |
| 1. | ON Key |
| 2. | OFF Key |
| 3. | Defrost |
| 4. | High Speed Lockout |
| 5. | Soft Keys |
| 6. | Box Temperature |
| 7. | Setpoint |
| 8. | Display |
SPECTRUM - Premium HMI Control Panel Display
| Hard Keys (1–4) | |
| 1. | ON Key |
| 2. | OFF Key |
| 3. | Defrost |
| 4. | High Speed Lockout |
| 5. | Zone 1 Soft Keys |
| 6. | Box Temperature |
| 7. | Setpoint |
| 8. | Zone 2 Display |
| 9. | Zone 2 Soft Key |
| 10. | Menu Soft Key |
The HMI control panel consists of a display and 8 touch-sensitive keys. The display is capable of showing both text and graphics
The keys on the left and right sides of the display are dedicated
single function "hard" keys.
The four keys under the
display are "soft" keys. The functions of these soft keys change depending
on the operation being performed. If a soft key is active the current
key function is shown in the display directly above the key.