HMI Control Panel

The HMI Controller communicates with the Base Controller (located inside the control box) and is used operate the unit and display unit information. It also provides access to all the controller functions and menus.

Parent topic: Unit Description

Standard HMI Control Panel

The Standard HMI Control Panel (Human/Machine Interface) is used to operate the unit and display unit information. The Control Panel is typically located in the vehicle driver's compartment and communicates with the base controller using a connection on the interface board.

Standard HMI Control Panel

Premium HMI Control Panel

The Premium Truck HMI (Human/Machine Interface) Control Panel is available as an option on TSR-3 applications. It is used to operate the unit, display unit information and access all TSR-3 Maintenance and Guarded Access Menus. The Control Panel is typically located in the vehicle driver's compartment and communicates with the base controller using a connection on the interface board.

Premium HMI Control Panel

Premium HMI Control Panel - Spectrum

T-Series Intermodal

Intermodal unit uses the SR-3 control system to operate cooling, heating, and defrost functions. See below some basic information on operating the unit.

Note Contact your Dealer in order to refer to our appropriate “Drivers Guide to Simple Operation” for more details on operating the standard unit. See below picture of this unit, but from here on through this manual the standard TSR-3 Premium display will be referenced as it has the same or similar functionality.

Intermodal Spectrum SR-3 Controller Display

      1. On Key (Dedicated Key)
      2. Off Key (Dedicated Hard Key)
      3. Display
      4. Defrost Key (Dedicated Key)
      5. CYCLE-SENTRY/Continuous Mode Key (Dedicated Key)
      6. Soft Keys