Navigating Controller Operating Menu

MP4000 Control Panel Display

Menu Scrolling Keys

Moving through these seven menus, their submenus, and entering commands requires the use of four keys:

EXIT - Press the F1 key each time you want to exit a submenu shown in the message display.
UP/ DOWN - Press the F2 or F3 key each time you want to scroll up or down in a menu or submenu shown in the Message Display; or scroll forward or backward in a menu line.
 
ENTER - Press the F4 key to enter a new menu or submenu.

The MP4000 contains an extensive operating menu. The main menu is divided into seven major areas that can be navigated via keypad.

  • Values Menu - Menu screens in this group are used to display unit operating information including temperature values, pressure values, air values, unit electrical data, etc., and any input to the controller.

  • Controls Menu – Menu screens in this group are used to enter allowable setpoints.

  • Alarm Menu - Display a list of alarm code(s) present.

  • Message Menu - Display a list of message(s) present.

  • Configuration Menu - Menu screens in this group are used to change the functionality of the unit operation.

  • Log View Menu - Menu screens in this group display log information or log function. Includes: Inspect Log, set Trip Start, and Set Log Interval.

  • Info Menu - Menu screens in this group give information on software version and expansion slots.

A complete listing of the controller operating menu is located on an 11’ x 17’ fold out in the Diagrams chapter (Diagram Index). It is designed to be folded out so you can continuously view it as you are learning how to navigate the MP4000 Controller Menu. It is recommended to fold this menu out and leave it folded out until you become familiar with the controller menu.

Changing Screen Contrast

Change the screen contrast temporarily as follows:

  1. Press and hold the F1 INFO KEY until the Contrast Screen appears.

  2. Press the F2 or F3 UP/DOWN KEYS to scroll the Contrast up or down.

  3. Press and hold the F4 ACCEPT KEY to confirm the new Contrast Setting.