Turning a Zone On and Off
If the number of zones configured is greater than 1, then all zones can be turned off and on as desired.
Note There must always
be at least 1 zone turned ON. It is not possible to turn OFF all zones
at the same time.
The state of each zone is retained when the unit is turned off and on. For example, on a two zone unit if Zone 2 is turned off and Zone 1 is turned on and the unit is turned off, the zone states remain as they were. When the unit is turned back on Zone 2 will still be off and Zone 1 will still be on.
Note Units equipped with
a remote control may operate in a slightly different manner. Refer
to Rear Remote Control Panel for additional details.
For example, to turn Zone 2 off, press Soft Key 2 under SETPOINT and navigate to the Zone 2 using the RIGHT Key:
Press Soft Key 1under ZONE-2 OFF and then press Soft Key 3 under CONFIRM. The display briefly shows the programing process and the display returns to the Standard Display, showing Zone 2 is off: