Language Selection

After turning the unit ON and the Configuring System is complete, the Language Selection display will appear (if set to ENABLED).

Note English is the default language.

To change the language:

  1. Use navigation keys to scroll to preferred language.

  2. Press Accept/Change Key or Cancel.

  3. The Standard Display with the chosen language will appear next.

  4. Note If no key is pressed in language prompt for 45 seconds then the current language will be retained and the HMI will transition to the Standard Display.

If Language Selection does not appear on startup, then Language change is not activated. Once you follow the steps below, this will activate the language changer. To change the language:

  1. Access the MAIN MENU by pressing the Accept/Enter Key.

  2. Use the arrow keys to access LANGUAGE.

  3. Use arrow keys to choose language and press the Accept/Enter Key.

  4. Exit the Main Menu.

Parent topic: Operating the A-Series Controller