Turning Unit On
Note The Main On/Off Switch must be in the “ON” position for the unit
to operate.
Turn unit on by pressing the ON Key.
- Note
-
System startup sequence may take up to 60 seconds.
-
If Electric Standby is active, there may be some additional prompts before the electric motor will start.
Note Operating Mode: The unit retains the last user configured
operating mode when power cycled. i.e., if the unit was running in
Continuous Mode, and power is cycled, the unit would still remain
in continuous mode.
The temperature setpoint or other system
changes can now be made if required.