Fuses

The electrical components are protected by various fuses.

Unit Component Fuses - These fuses are located in the condenser unit. Remove the condenser cover to access them. Depending on your model, some fuses may not be used.Refer to (Electrical Control System).

PDU Fuses – The PDU fuses is located inside the PDU. These 25 amp fuses are non-serviceable and must only be replaced by an authorized Thermo King Dealer.

Low Voltage e-PTO Jumper Harness- These fuses are located in the LV e-PTO section.

Fuse Location (condenser cover removed)

Note Make sure that the battery is not connected before the removal of the cover.