Connecting with Shore Power

    Caution
  • Equipment Damage
  • Use the dedicated charger and adapter provided with the Energ-e Pack.
    Important: It is not allowed to use extension cords for the charging cable.

  1. Connect the red CEE plug with the shore power connection.
    Do not use extension cables.

  2. For the charging connection of the Energ-e Pack, open the cover of the HMI panel with coin or screwdriver.

  3. Insert the black type 2 plug into the Energ-e Pack charging socket.

  4. When the LED of the in-cable device of the charging connector (Eveline) stays yellow, the charger is ready to charge and charging starts automatically.


The HMI display will automatically light up.

If the Trailer Refrigeration Unit (TRU) is switched on, the Energ-e Pack will supply the TRU — either by shore power or by the HV battery.

Connecting with shore power: Message on HMI

The icon for Shore Power Mode appears in the HMI header:

HMI, header: Operation Mode icon
Parent topic: Charging with Shore Power