Emergency Shutdown
If you notice any strange noise or smell from the unit, shut down the unit normally:
-
Turn TRU off,
-
and disconnect shore power connection,
-
and turn ignition off.
With this, the Energ-e Pack automatically shuts down after one minute of inactivity.
-
Alternatively long press ON/OFF button for more than 3 seconds. The Energ-e Pack System shuts down immediately.
- Danger
- Risk of Injury and Equipment Damage!
- Stop using the system if the Energ-e Pack is damaged, develops an odor, becomes deformed, or develops any other abnormal conditions during use, charge, discharge, or storage. If you notice any abnormal conditions, contact the Thermo King service center.
- Danger
- Risk of Injury and Equipment Damage!
- In case of accidents, keep away from fire and hot sources and park the vehicle in a safe area. Contact the Thermo King service center.
In the event of an emergency (fire, accident), you have to stop all high voltage current flow by cutting the Kill Wire (Emergency Disconnect).
The Kill Wire is located next to the HMI behind the lid which needs to be unlocked with coin or screwdriver.
| 3 | Kill Wire (Emergency Disconnect) |
- Danger
- Risk of Injury and Equipment Damage!
- Only instructed operators or service technicians with the recommended tools should cut the Emergency Disconnect Wire.
- Warning
- Equipment Damage!
- If you are charging the battery, shutting off the power supply on the wall side is recommended in case of Emergency Disconnect and cutting the Kill Wire. Switch off the wall box or pull the CEE plug.
Emergency Shutdown:
-
Cut the Kill Wire (Emergency Disconnect wire).
-
Please move away from the vehicle and follow the emergency communication procedure.
=> Cutting the Emergency Disconnect wire does not de-energize the HV battery and does not prevent hazards associated with the HV battery.