Alarm Details

If you want to get more information on a single alarm, select this alarm in the alarms list:

1		In the alarms list, select the alarm with ‘arrow down’ soft key (second to the left).
2		Press ‘arrow down’ or ‘arrow up’ until the marking arrow pointing to the right is positioned besides the desired alarm.

In the figure below, this is alarm 978:

Confirm with the confirmation button on the right.

The details on an alarm have two or three pages.

1		You access the following page with ‘arrow down’.
2		You return to the preceding page with ‘arrow up’.
3		Press the left soft key to return to the Alarms submenu.

The recommended action to take is on the first page. For more information, refer to Alarms Listed by Recommended Action to Take.

Detailed information on a selected alarm — example:

The following figures show details for alarm 978:

In this case of alarm 978, the recommended action to take is "Wait for unit to auto-restart". You always find this on page 1 of the alarm details:

On the second page, you find further technical information on the alarm (FMI, Failure Mode Indicator) and how often the alarm popped up. In this example it is “Bad device” (FMI 12) and the alarm was raised just once (“Count: 1”).