Starting the AFAM System

  1. Press the F4 key to enter the main menu. Press the F2 or F3 key to scroll to Config menu and press F4 to expand the menu.

  2. Press the F2 or F3 key to scroll to Options menu and press F4 to expand the menu.

  3. Press the F2 or F3 key to scroll to Controlled Atmosphere (CA) menu and press F4 to enter the menu.

  4. Press the F2 or F3 key to select AFAM and Press and hold F4 to accept the selection.

  5. Press the F1 key several times to return to the standard display.

  6. Press the F4 key to enter the main menu. Press the F2 or F3 key to scroll to Controls menu and Press F4 to expand the menu.

  7. Press the F2 or F3 key to scroll to Fresh Air Vent Man menu. Press the F4 key to enter the Fresh Air Vent Man menu.

      Warning
    • Risk of Injury
    • The vent door and motor actuator arm move immediately when the F4 key is pressed to turn the AFAM system to AFAM or Off. Keep hands and tools away from the air exchange system components to prevent personal injury or unit damage.

  8. Press the F2 or F3 key to scroll between [OFF] and [AFAM].

    • [OFF]: Vent door closes and/or remains closed. AFAM Delay and AFAM Rate settings disappear.

    • [AFAM]: Controller uses enter AFAM DELAY and AFAM RATE time to adjust FAE door to user setting.

  9. Press and hold the F4 key with the desired state in the menu line until you are returned to the Controls menu.

  10. Press the F1 key several times to return to the standard display.

Parent topic: Advanced Fresh Air Management (AFAM) System