Software Versions

The various software versions are listed below.

Software Version 2.3.4 100927

Release Date Features
September 2010

  • Unit Running No Display.

  • OOCL Unit Features Added for MAGNUM SL 211.

  • RMM+ Added for TAL.

  • Shorter Logging Intervals Default OFF.

  • Index for Event with RMM+.

  • Refer to Software Bulletin MP4000 2.3.4 100927 for details.

Software Version 2.3.6 110301

Release Date Features
April 2011

  • Cold Treatment (CT) has been added for all prefixes except OOLU.

  • Multi-Temperature settings has been added for all prefixes (including OOLU).

  • PTI test only has been added as a selection under the COMMANDS menu. Test will end after MAINTAINING 0C (32F) TEST is completed.

  • Cold Ambient Battery Issue.

  • Warning Message 39 Battery Error added.

  • PTI Pull Times Logged.

  • Warning 38 HIGH VOLTAGE ON LINE.

  • Power Limit Mode Based on Condenser Temperature.

  • AFAM Door Closes HLX.

  • MTS and CT Disabled after PTI.

  • RMM Enables for UACU Units.

  • Discharge Pressure now in Data Menu.

  • Mode Flags Added.

  • Defrost Termination Temperature and Interval Hours Limited.

  • Trip Start All Temperature Logged.

  • AFAM PTI added.

  • Gas Sensor to be OFF when not selected.

  • Backlight ON.

  • Event Log Available in display.

  • Display timer.

  • Refer to Software Bulletin MP4000 2.3.6 110301 for details.

Software Version 2.3.7.0 110608

Release Date Features
June 2011

  • Cold Treatment (CT) has been added for all prefixes except OOLU.

  • MTS and CT Feature selectable.

  • MTS Feature Selects Present Setpoint.

  • USDA Trip Defaults OFF.

  • Dehumidify Improvement.

  • Battery Heater Disabled.

  • Compressor Temperature Reading.

  • Heating Element Type.

  • C to F or F to C Display Change.

  • Viewing Event or Temperature Logs in Display.

  • Refer to Software Bulletin MP4000 2.3.7.0 110608 for details.

Software Version 2.3.8.0 110628

Release Date Features
June 2011

  • Cold Treatment (CT) has been added for all prefixes except OOLU.

  • Keypad Lock feature has been added.

  • Refer to Software Bulletin MP4000 2.3.8.0 110628 for details.

Software Version 2.4.0.0 111220

Release Date Features
January 2012

  • Introduce field tester system tool (8232-010) functionality.

  • Alarm 127 GENERAL UNIT ERROR.

  • Alarm 52 PROBE ERROR.

  • Alarm 120 SUCTION PRESSURE SENSOR ERROR.

  • Alarm 31 LOW PRES CUTOUT.

  • Evaporator Fan Speed Option.

  • MTS Defaulted OFF on Power OFF.

  • COLD Treatment for HL.

  • Humidity Controller.

  • AFAM+, AFAM Disable in Frozen Mode.

  • AFAM Introduced.

  • RMM+ Controller Clock Update.

  • RMM Built in Option.

  • RMM+ Graphics.

  • Refer to Software Bulletin MP4000 2.4.0.0 111220 for details.

Software Version 2.4.2.0 120313

Release Date Features
April 2012

  • RMM Built in Option.

  • Refer to Software Bulletin MP4000 2.4.2.0 120313 for details.

Software Version 2.4.3.0 120628

Release Date Features
June 2012

  • RMM Built in Option.

  • Optimize (OPT).

  • Cooling Capacity Surveillance.

  • AFAM PTI Selectable.

  • Humidity Control Fan Change.

  • Humidity and AFAM+ PTI.

  • AFAM+ Auto Configuration.

  • HL AFAM.

  • PTI Aborted Event.

  • Setpoint Range +35C to -40C.

  • SmartPTI Event.

  • SmartPTI Thumbs Up.

  • Refer to Software Bulletin MP4000 2.4.3.0 120628 for details.

Software Version 2.5.0.0 121121

Release Date Features
November 2012

  • RMM Built in Option.

  • Display Contrast Improvement.

  • Gas Sensor ON/OFF Handling.

  • Humidity Operation.

  • Setpoint Change on Battery.

  • Frozen Optimized Mode.

  • Modbus Handling Changed.

  • Refer to Software Bulletin MP4000 2.5.0.0 121121 for details.

Software Version 2.5.1.0 130213

Release Date Features
February 2013

  • Alarm 137 Sensor System Overload.

  • Alarm 140 Evaporator Section Too Hot.

  • Alarm 98 Compressor Temperature Sensor Short Circuit.

  • Phase Check.

  • Setpoint of +45.

  • RMM Option.

  • SmartPTI Thumbs Up changed.

  • Refer to Software Bulletin MP4000 2.5.1.0 130213 for details.

Software Version 2.5.3.0 130424

Release Date Features
May 2013

  • Cold Storage Defrost Feature.

  • SmartPTI Feature.

  • O2 Sensor Calibration AFAM+ PTI.

  • Refer to Software Bulletin MP4000 2.5.3.0 130424 for details.

Software Version 3.1.0.0 140612

Release Date Features
June 2014

  • Software File Format SIP.

  • Alarm 60 Humidity Sensor.

  • Alarm 68 CO2/O2 Sensor Error.

  • Bulb Mode.

  • Refer to Software Bulletin MP4000 3.1.0.0 140612 for details.

Software Version 3.2.0.0 140822

Release Date Features
August 2014

  • RMM Option.

  • SMART PTI Option.

  • Humidity Sensor Alarm 60.

  • PTI HPCO Test.

  • Refer to Software Bulletin MP4000 3.2.0.0 140822 for details.

Software Version 3.4.0.0 150729

Release Date Features
August 2015

  • Dry Cargo - New controlling mode.

  • Automatic Dry Cargo option for YML container numbers.

  • Abandon sensor must disable optimized mode.

  • Missing logs - deletion of the first internal log file.

  • Alarm 68 occurs in standby mode.

  • Gas analyzer sensor is powered in standby mode.

  • Capacity limitation activates log flag for CA control.

  • Boot loader must support sip files.

  • Battery surveillance is not discovering open protection circuit.

  • Battery alarms must only occur in PTI.

  • A battery icon has been added to the main screen indicating: battery full charged, charging or error.

  • Coin battery surveillance.

  • Remove Chill PTI and rename PTI to Full PTI for SUDU prefix.

  • Differentiate set point and controlling temperature.

  • AFAM defaulting for Hapag Lloyd units.

  • Option Changes: RMM Option, SMART PTI Option

  • Refer to Software Bulletin MP4000 Appl 3.4.0.0 Opt 3.4.2.0 150729 for details.

Software Version 3.5.0.0 151009

Release Date Features
October 2015

  • Dry Cargo - New controlling mode. Implemented in Version 3.3.0 Software.

  • Automatic Dry Cargo option for YML container numbers. Implemented in Version 3.3.0 Software.

  • Abandon sensor must disable optimized mode. Implemented in Version 3.3.0 Software.

  • Missing logs - deletion of the first internal log file. Implemented in Version 3.3.0 Software.

  • Alarm 68 occurs in standby mode. Implemented in Version 3.3.0 Software.

  • Gas analyzer sensor is powered in standby mode. Implemented in Version 3.3.0 Software.

  • Capacity limitation activates log flag for CA control. Implemented in Version 3.3.0 Software.

  • Boot loader must support sip files. Implemented in Version 3.3.0 Software.

  • Battery surveillance is not discovering open protection circuit. Implemented in Version 3.3.0 Software.

  • Battery alarms must only occur in PTI. Implemented in Version 3.3.0 Software.

  • Battery icon. Implemented in Version 3.3.0 Software.

  • Coin battery surveillance. Implemented in Version 3.3.0 Software.

  • Remove Chill PTI and rename PTI to Full PTI for SUDU prefix. Implemented in Version 3.3.0 Software.

  • Differentiate set point and controlling temperature. Implemented in Version 3.3.0 Software.

  • AFAM defaulting for Hapag Lloyd units. Implemented in Version 3.3.0 Software.

  • Option Changes: RMM Option - Implemented in Version 3.5.0 Software, SMART PTI Option - Implemented in Version 3.4.0 Software.

  • Refer to Software Bulletin MP4000 Appl 3.5.0.0 Opt 3.5.0.0 151009 for details.

Software Version 3.5.0.0 151103

Release Date Features
November 2015

  • Option Changes: RMM Option - Implemented in Version 3.5.3.0 Software.

  • Refer to Software Bulletin MP4000 Appl 3.5.0.0 Opt 3.5.3.0 151103 for details.

Software Version 3.6.0.0 20160128

Release Date Features
February 2016

  • AFAM vent door alarm 57.

  • MP4000 tester expansion slot test.

  • Error value for faulty battery.

  • Option Changes: 3.5.1.0: RMM activation for 250 TAL; 3.5.2.0: RMM activation for TAL, RMM activation for Braun; 3.5.3.0: RMM activation for Unit 45 (CMA); 3.5.4.0: Smart PTI for Braun; 3.6.0.0: RMM activated for CMA (unit 1); 3.6.1.0: Cold Store Defrost feature activated.

  • Refer to Software Bulletin MP4000 Appl 3.6.0.0 Opt 3.6.1.0 20160128 for details.

Software Version 3.7.0.0 20160404

Release Date Features
February 2016

  • AFAM Door Closed on Power OFF.

  • Battery Power Management Enhancements.

  • PTI Performed without Battery.

  • Non Optimized default for CTAU prefix.

  • Bug in Menu on Battery Power.

  • Wall Clock Wakeup System not always turned OFF.

  • Prevent Temperature Below Set Point.

  • Option Changes: 3.7.1.0: Smart PTI activate for Braun BCHU930000, 930001, 930002 BCHU720000, 740000.

  • Refer to Software Bulletin MP4000 Appl 3.7.0.0 Opt 3.7.1.0 20160404 for details.

Software Version 3.8.0.0 20160512

Release Date Features
May 2016

  • Evap Fan Control SUDU.

  • Controller and Power module serial number will now show old and new format.

  • Refer to Software Bulletin MP4000 Appl 3.8.0.0 Opt 3.8.0.0 20160512 for details.

Software Version 3.9.0.0 20160530

Release Date Features
May 2016

  • Option File Missing After Power On

  • Option Changes: 3.9.0.0: Smart PTI enabled for TAL units.

  • Refer to Software Bulletin MP4000 Appl 3.9.0.0 Opt 3.9.0.0 20160530 for details.

Software Version 3.10.0.0 20160708

Release Date Features
July 2016

  • AFAM Door Operation ON Battery Power.

  • PTI would pass with a Faulty Digital Valve.

  • Battery Test added to Brief PTI.

  • Alarm 57 FAE Device Error.

  • ICON or Menu Tree Display Change.

  • Refer to Software Bulletin MP4000 Appl 3.10.0.0 Opt 3.9.0.0 20160708 for details.

Software Version 3.11.0.0 20170516

Release Date Features
May 2017

  • Missing Temperature Logs (USDA) on Battery Power.

  • Controller Reboot after retrieving download using SD Card.

  • Resetting of USDA Calibration after Flashloading.

  • USDA Calibration Reset Event.

  • Loading of the Wrong Option File.

  • SmartPTI Max Days minimum limit change to 2 days.

  • Option Changes: RMM enabled for the following container numbers: WHLU740001 to WHLU740200, SZLU989311 to SZLU989810, TEMU925730 to TEMU926229.

  • Refer to Software Bulletin MP4000 Appl 3.11.0.0 Opt 3.11.0.0 20170516 for details.

Software Version 3.13.0.0 20170516

Release Date Features
November 2017

  • Optional AVL Full Range Disk 0-225 cmh.

  • Option Changes: Non-Optimized Mode as default for the following container IDs: TAL TLLU107760 to 107859 and TLLU108060 to 108259; Smart PTI option for BCHU 083040 to 083049 and BCHU 760015 to 760019.

  • Refer to Software Bulletin MP4000 Appl 3.13.0.0 Opt 3.13.2.0 20170516 for details.

Software Version 3.14.0.0 20171220

Release Date Features
January 2018

  • High speed fans for TITAN prefix in frozen mode.

  • USDA mode to disable Optimized Mode.

  • Non-optimized mode when dehumidification is on.

  • Pressure sensors are tested when not mounted.

  • Too many battery events in Logger.

  • Controller shutting down.

  • Failing HCPO switch flushing data log.

  • Failing HCPO switch must trigger an alarm.

  • Stop charger when battery level is fully charged.

  • Option Changes: Option file read error triggering user type change. Debug information has been added to this version to catch the problem.

  • Refer to Software Bulletin MP4000 Appl 3.14.0.0 Opt 3.14.2.0 20171220 for details.

Software Version 3.15.0.0 20180313

Release Date Features
May 2018

  • USDA Sensors Defaulting.

  • Energy Data Logging Feature.

  • Conditions to default (return to ON) for the “ENERGY LOGGING” option.

  • Manually turning ON the Energy Data Logging.

  • Menu Values ENERGY LOGGING screen.

  • Option Changes: Cold store defrost option enabled for prefix TITU and BXRU; RMM communication enabled for container prefix PCIU (PIL customer).

  • Refer to Software Bulletin MP4000 Appl 3.15.0.0 Opt 3.15.0.0 20180313 for details.

Software Version 3.17.0.0 20180905

Release Date Features
September 2018

  • Smart PTI - Auto Acknowledge.

  • Skip Extended Defrost on CT and USDA shipments.

  • The option file read error after installing new firmware has been resolved.

  • Phase Error is now logged in the event log.

  • Option Changes: RMM communication enabled for container prefix CICU 827089 – 827106 (TCRC customer).

  • Refer to Software Bulletin MP4000 Appl 3.17.0.0 Opt 3.17.0.0 20180905 for details.

Software Version 3.17.0.0 20181022

Release Date Features
October 2018

  • Option Changes: Extended set point range -40C to +45C enabled for prefix ZGRU; Cold store defrost option enabled for prefix ZGRU.

  • Refer to Software Bulletin MP4000 Appl 3.17.0.0 Opt 3.17.2.0 20181022 for details.

Software Version 3.19.0.0 20191022

Release Date Features
October 2018

  • SMART PTI MAX AGE has disappeared for all the customers

  • No defaulting after temperature set point change

  • Option Changes: Enabled 'Wall Clock Defrost' / 'Cold Store Defrost' for prefix TYRU ; Smart PTI feature enabled for OERU (OOCL) ; Default to Non Optimized ; RMM and Dry Cargo option for Yang Ming

  • Refer to Software Bulletin MP4000 Appl 3.19.0.0 Opt 3.19.3.0 20191022 for details.

Software Version 3.19.0.0 200907

Release Date Features
October 2018

  • Option Changes: Option set for ’TYRU’ +45C and defaulting to Non-optimized ; Option "Frozen Mode - Fan Speed Control" for ID 'ZGRU' ; Option "Frozen Mode - Fan Speed Control" for ID 'TYRU' ; Option set for CGMU555700-557699 RMM and SmartPti ; Frozen Mode - Fan Speed Control.

  • Refer to Software Bulletin MP4000 Appl 3.19.0.0 Opt 3.19.9.0 200907 for details.

Software Version 3.19.4.0 20200303

Release Date Features
October 2018

  • Option Changes: Defaulting to Non-optimized for the following range of Container ID’s: TLLU 120264 – 120313 ; Extended Set Point from -40C to +45C for TITU, TCIU and BXRU container prefixes ; Not be possible to shift from C (Celsius) to F (Fahrenheit) for Container Prefix ECBU..

  • Refer to Software Bulletin MP4000 Appl 3.19.4.0 Opt 3.19.4.0 20200303 for details.

Software Version 3.19.6.0 20200602

Release Date Features
October 2018

  • Option Changes:YML added Option RMM and SmartPti ; CMA Added Option RMM and SmartPti

  • Refer to Software Bulletin MP4000 Appl 3.19.6.0 Opt 3.19.6.0 20200602 for details.

Software Version 3.19.7.0 200624

Release Date Features
October 2018

  • Option Changes: CGMU851642–851841, Added Option “Default to NON-OPTIMIZED ; CGMU851642–851841 added the option to default to non-optimized controlling when changing temperature setpoint more than 3C or when the setting is defaulted (>5 days off, after PTI, after firmware flash load).

  • Refer to Software Bulletin MP4000 Appl 3.19.7.0 Opt 3.19.7.0 200624 for details.

Software Version 3.20.0.0 2012100

Release Date Features
October 2018

  • Added Refrigerant selection to CONFIG menu

  • Missing Event and Temperature logs bug fixed

  • C/F change event

  • Container ID change text missing

  • Container box property added - Container length and height

  • Option Change: Bulb Mode for OOCL ; Smart PTI Activated for HL prefixes ; Option set for ’TYRU’ +45C and defaulting to non-Optimized ; Option "Frozen Mode - Fan Speed Control" for ID 'ZGRU' ; Option "Frozen Mode - Fan Speed Control" for ID 'TYRU' ; Option set for CGMU555700-557699 RMM and Smart PTI ; Frozen Mode - Fan Speed Control ; Flashload Procedures

  • Refer to Software Bulletin MP4000 Appl 3.20.0.0 Opt 3.20.0.0 2012100 for details.

Parent topic: Controller Description