Entering the setpoint temperature

The Setpoint Temperature can be quickly and easily changed.

  1. Press and release the SET key once, and the letters SP will appear on screen.

  2. Press SET key again and the current Setpoint Temperature will appear on screen.

  3. Press the UP or DOWN arrow keys to select the desired Setpoint Temperature. Each time either of these buttons is pressed and released, the Setpoint Temperature will change 1 degree. Setpoint Temperature will also change continuously if UP/ DOWN key is continuously pressed without release.

  4. Press and release the SET key to set the setpoint.

  5. Press and release ON/OFF key twice to return to the Standard Display.

    Caution
  • Service Procedure
  • If the SET key is not pressed within 20 seconds to select the new Setpoint Temperature, the unit will continue to run at the original Setpoint Temperature.
Parent topic: Operation Instructions