Initiating the Evaporator Manual Defrost Cycle
Important Before initiating a manual defrost, ensure
that the unit is not already in a defrost cycle. When the unit is
in a defrost cycle the defrost symbol appears on screen.
-
Press and release the Select key once, and the letters dEF will appear (flashing) on screen along with the present defrost condition OFF.
-
To activate manual defrost, press the Enter key and then the Up or Down key and the defrost condition will change to On.
-
Press the Select key twice to return to the Standard Display (three times in bi-temperature units and in reverse cycle units), where the letters dEF and the DEFROST symbol will appear when the defrost cycle starts (the load compartment temperature must be lower than 0ºC).
Note The letters dEF will remain on screen for a while after returning to cool mode.
