Turning Zones On and Off
Each configured zone can be individually turned on or off. The On and Off state for each zone is maintained even if the unit is turned off and back on. For example, if Zone 2 is turned off and the unit is then turned off and back on, Zone 2 will still be off.
- Important
-
At least one zone must be turned on. If all configured zones but one are turned off, the controller will not allow the last zone to be turned off.
-
Unlike trailer applications, Zone 1 can be turned off without affecting unit operation, so long as at least one other zone is turned on.
From the Standard Display, press the Enter Key to put the unit in Manual Zone Selection mode. Press the Enter Key again as required to select the desired zone. In the example shown ( Zone 2), Zone 2 has been selected.
When the desired zone is selected, simultaneously press the ON Key and ENTER Key to turn the zone off. The box temperature and setpoint show all dashes to indicate the zone is turned off as shown ( Zone Off).
Simultaneously pressing the ON Key and ENTER Key again will turn the selected zone back on as shown ( Zone On).