High speed operation can be locked out in noise sensitive areas
if required.
Note High Speed Lockout Enable must be set
to [Enabled] in the Guarded Access/Programmable Features Menu or this
feature will not be available.
Important HIGH
SPEED LOCKOUT TIMEOUT: If High Speed Lockout Mode is selected, the
High Speed Inhibit Timeout feature may be set to return the unit to
normal operation after a set time period has expired. This prevents
extended operation with high speed operation locked out. The time
period may be from 15 minutes to 2 hours. If the time period is set
and is exceeded, the unit will return to normal operation, with high
speed operation allowed. If this occurs, the message HIGH SPEED LOCKOUT
ACTIVE at the top of the display will disappear. If necessary to return
to High Speed Lockout Mode, press the High Speed Lockout Key again.
The High Speed Lockout Key is a toggle. If high speed is currently
allowed, pressing the High Speed Lockout Key will disable high speed
operation. Pressing the High Speed Lockout Key again will allow high
speed operation. To change the setting, press the High Speed Lockout
key as shown ( High Speed Lockout Key High Speed Lockout Key).
High Speed Lockout Key
High Speed Lockout Key
The display will briefly show [PROGRAMMING HIGH SPEED LOCKOUT -
PLEASE WAIT].
Programming Screen
The change is confirmed by briefly displaying [HIGH SPEED LOCKOUT
ACTIVE] or [HIGH SPEED LOCKOUT INACTIVE].
High Speed Lockout Display
The display will then return to the Standard Display. If High Speed
Lockout is turned on, the message HIGH SPEED LOCKOUT ACTIVE will be
shown at the top of the display.
High Speed Lockout Active
High Speed Lockout Active
Pressing the High Speed Lockout key again will turn the feature
off.
