Printing a Trip Report

This procedure shows how to connect a TouchPrint Printer, TouchPrint datalogger or equivalent to the unit. The printed record shows things such as the unit and Base Controller identification numbers, dates and times, the setpoint, and the data from the optional sensors connected to the CargoWatch datalogger. If no sensors are connected, the printed record shows the same things without the sensor data.

  2. Connect the printer to the 6-spliced wires located inside the control box.

    Note Contact your Thermo King dealer about printer connection location options.

  3. Please refer to your TK 61009-11-OP TouchPrint Operator Manual (or third party printer manual) for instructions for setup and use.

Note For additional information concerning the TouchPrint Printer or CargoWatch/TouchPrint Datalogger contact your Thermo King dealer.

Printer Connection Location

        1. LVD Bracket
        2. Printer Wire Splices

Parent topic: Operating the SR-3 Controller