Inspection and Service Intervals
Inspection and Service intervals are determined by the number of unit operating hours and by the age of the unit. Examples are shown in the table below. Your Dealer will prepare a schedule to suit your specific needs.
Service Record: Each inspection and service performed should be recorded on your Dealer Service Record.
| Interim Inspection | Complete PM | Full Service |
|---|---|---|
|
A Service Every 500 hours or every 6 months (whichever comes first) |
B Service Every 1500 hours or every 12 months (whichever comes first) |
C Service Every 3000 hours or every 24 months (whichever comes first) |
| Pretrip | Inspect/Service These Items | |
|---|---|---|
| • | Listen for unusual noises, vibrations, etc. | |
| • | Visually inspect unit for fluid leaks. (fuel, coolant, oil and refrigerant). | |
| • | Visually inspect unit for damaged, loose or broken parts (includes air ducts and bulkheads if so equipped). | |
| • | Visually inspect belt. | |
|
Note For further
best practices, please go to www.europe.thermoking.com/best-practices.
|
||
Warranty Inspection
The unit must be presented at the buyers expense at an authorised Thermo King dealer or service provider for an inspection. The inspection will verify that the unit has been correctly maintained and any upgrades or repairs deemed necessary will be carried out. Subject to a satisfactory inspection, the second twelve months warranty cover will be authorised. This is illustrated in the table above.