Entering Setpoint Temperature

The Setpoint Temperature can be quickly and easily changed.

Parent topic: Operating Instructions

Single Temperature Units

  1. Press and release the Select key twice, and the current Setpoint Temperature and the letters SP will appear on screen.

  2. Press the Up or Down arrow keys to select the desired Setpoint Temperature. Each time either of these buttons is pressed and released, the Setpoint Temperature will change one degree.

  3. Press and release the Enter key to set the setpoint or press and release the Select key to set the setpoint and return to the Standard Display.

    Important If the Select key or the Enter key is not pressed within 20 seconds to select the new Setpoint Temperature, the unit will continue to run at the original Setpoint Temperature.