Truck Standard Display HMI Control Panel

The Truck Standard Display (TSD) HMI Control Panel is used to operate the unit and display some unit information. The Truck Standard Display communicates with the Base Controller via the Controller Area Network (CAN) bus. It is connected to the Base Controller via CAN Connector J14. The TSD is typically located in the vehicle driver’s compartment. It may be located in the truck dashboard using a DIN mounting ring or under the dashboard using an under dash mounting kit.

The Truck Standard Display (TSD) HMI Control Panel is used to operate the unit and display some unit information. The Truck Standard Display communicates with the Base Controller via the Controller Area Network (CAN) bus. It is connected to the Base Controller via CAN Connector J35. The TSD is typically located in the vehicle driver’s compartment. It may be located in the truck dashboard using a DIN mounting ring or under the dashboard using an under dash mounting kit.

Truck Standard Display HMI Control Panel

In this section:

  1. Display
  2. Keys and LED Indicators
  3. Turning the Unit On and Off
  4. The Standard Display
  5. Changing the Setpoint
  6. Starting the Diesel Engine
  7. Starting the Electric Motor
  8. Switching from Diesel to Electric
  9. Switching from Electric to Diesel
  10. Selecting CYCLE-SENTRY or Continuous Mode
  11. Selecting the High Speed Lock-Out Feature
  12. Initiating a Manual Defrost Cycle
  13. Alarms
  14. Sending a Servicewatch Data Logger Start of Trip
  15. Pretrip Test
  16. Performing a Pretrip Test
  17. Display Brightness
  18. Keypad Lockout
  19. Checking Truck HMI Control Panel Software Revision and Serial Number
  20. Displaying Date and Time
  21. Checking or Setting Date and Time Using WinTrac™
  22. Setting Date and Time
Parent topic: Operating Instructions - Basic HMI Controller

Features

  • Displays Box Temperature and Setpoint in Fahrenheit or Celsius

  • Displays Engine Running Hourmeter and Motor Running Hourmeter

  • Indicates the current zone on Multi-Temperature applications

  • Changes Unit or Zone Setpoints

  • Selects and indicates Cycle Sentry or Continuous Mode Operation

  • Selects and indicates High Speed Lock-Out Operation

  • Initiates and indicates a Unit or Zone Defrost Cycle

  • Indicates an alarm condition exists, displays and clears alarms

  • Initiates and indicates a Pretrip Test

  • Sends a Start of Trip Marker to the ServiceWatch Data Logger

  • Changes display brightness

  • Shows Truck Standard Display serial number and software revision

  • Displays and changes Date and Time

Features

  • Displays Box Temperature and Setpoint in Fahrenheit or Celsius

  • Displays Engine Running Hourmeter and Motor Running Hourmeter

  • Indicates the current zone on Multi-Temperature applications

  • Changes Setpoint

  • Selects and indicates Cycle Sentry or Continuous Mode Operation

  • Selects and indicates High Speed Lock-Out Operation

  • Initiates and indicates a Defrost Cycle

  • Indicates an alarm condition exists, displays and clears alarms

  • Initiates and indicates a Pretrip Test

  • Sends a Start of Trip to the ServiceWatch Data Logger

  • Changes display brightness

  • Shows Truck Standard Display serial number and software revision