Inspection and Maintenance Instructions

    Notice
  • Operational Safety
  • To ensure the operational safety and efficient operation of the FRIGOBLOCK refrigeration machine, perform daily inspections of the refrigeration machine and observe the following instructions for maintenance work. Observe the occupational safety regulations and the safety instructions in this documentation for all works

Depending on the application and operating conditions, regular maintenance must be performed on the entire refrigeration system by a service partner who has been authorised and trained by FRIGOBLOCK. Details can be found in the Service Check Book.
    Caution
  • Risk of Injury
  • The unit can start and run automatically any time the unit is turned on. Turn the unit On/Off and unit maintenance switches off before opening doors, doing inspections, or working on any part of the unit.

  • Switch off the FRIGOBLOCK refrigeration machine

  • Turn off the vehicle's ignition

  • Set the Mains-0-Alternator switch to the "0" position or press the emergency switch in case of battery-powered vehicles.

  • If connected, disconnect the mains cable from the mains supply

  • The system must be secured against being switched on again with a lock on the M-0-A switch or on the vehicle's emergency stop switch.

Protective gratings, doors, covers and gates that have been opened or removed for maintenance purposes must be reinstalled and/or closed before starting up again.
    Warning
  • Risk of Injury!
  • Rotating parts. Take precautions.
    Warning
  • Risk of Injury
  • The surfaces of components of the refrigeration machine may be hot (above +60°C) or cold (below 0°C). Before starting work, wait until the temperature has equalised.
    Caution
  • Risk of Injury
  • When working on components at a height, make sure that there is adequate protection against falling!

In this section:

  1. Visual inspections before the Start of the Trip
  2. Inspections and Maintenance Services Performed by the Operator
  3. Recording Duty