Language SelectionSubmenu

After turning the unit ON and the Configuring System is complete, the Language Selection display will appear (if set to ENABLED).

To change the language:

1. Use navigation keys to scroll to preferred language.

2. Press Accept/Change Key or Cancel.

3. The Standard Display with the chosen language will appear next.

4. Note If no key is pressed in language prompt for 45 seconds then the current language will be retained and the HMI will transition to the Standard Display.

   Language Selection Displays Shown

   Open
   Open

If Language Selection does not appear on startup, then Language change is not activated. Once you follow the steps below, this will activate the language changer. To change the language:

1. Access the MAIN MENU by pressing the Accept/Enter Key.

2. Use the arrow keys to access LANGUAGE.

   Open
   Open

3. Use arrow keys to choose language and press the Accept/Enter Key.

4. Exit the Main Menu.

The Language submenu allows the user to select a language from a list of up to 23 languages at one time. All subsequent displays are shown in the selected language. From the Standard Display, press the ACCEPT/ENTER center key. From the Main Menu screen, select Language and press the ACCEPT/ENTER center key.

To change the language, use the navigation keys to scroll to the preferred language. Press the ACCEPT/ENTER key. The Standard Display with the chosen language will appear next.

If the Language submenu does not appear on startup, Language Change will not be activated. To change the language, access the Main Menu by pressing the ACCEPT/ENTER Key. Use the arrow keys to access LANGUAGE. Use the arrow keys to choose the language and press the ACCEPT/ENTER Key. Exit the Main Menu.