Entering the Setpoint Temperature

The Setpoint Temperature can be quickly and easily changed.

1. Press and release the Select key twice (three times for reverse cycle units), and the current Setpoint Temperature and the letters SP will appear on screen.

2. Press the Up or Down arrow keys to select the desired Setpoint Temperature. Each time either of these buttons is pressed and released, the Setpoint Temperature will change one degree.

3. Press and release the Select key, and the Standard Display will reappear on display.

   Important If the Select key is not pressed within 20 seconds to select the new Setpoint Temperature, the unit will continue to run at the original Setpoint Temperature.

Setpoint Temperature Display

Open