General Safety Practices
- Warning
- Equipment Damage and Risk of Injury
- Do not carry out maintenance and repair work by yourself. It can only be carried out by authorized service technician. Always contact the FRIGOBLOCK service partner.
- Danger
- Risk of Injury
- Keep hands and loose clothing clear of fans and belts at all times when the unit is operating with the doors open.
- Danger
- Confined Space Hazards
- Avoid engine operation in confined spaces and areas or circumstances where fumes from the engine could become trapped and cause serious injury or death.
- Warning
- Risk of Injury
- Turn off the Inverter Drive Remote Controller located
inside the driver’s cab and turn the vehicle’s engine off before any
installation work or inspecting any part of the system.
Turn off the vehicle’s engine before going under the vehicle to inspect the engine compartment or before tilting the cab. Make sure that the vehicle’s engine may not be started unintentionally.
- Warning
- Hazardous Voltage
- If handled improperly, electric voltage can cause internal and external burns or death. Refrigeration machines in the Mains mode operate at 400 Volts and in the Alternator mode up to 460 Volts.
- Caution
- Sharp Edges
- Use extreme care when working with exposed coil fins. Contact with fins can cause painful lacerations. Use gloves while handling coils.
- Caution
- Risk of Injury
- Do not remove or render ineffective any guard or safety device.
- Notice
- Equipment Damage
- All unit mounting bolts must be installed, be the correct length for their application, and torqued to specifications. Missing bolts, incorrect bolt lengths and improper torque specifications can damage equipment and void the warranty.
- Notice
- Equipment Damage
- Do not connect other manufacturer’s equipment or accessories to the FRIGOBLOCK system. This could result in severe damage to equipment and void the warranty.
- Notice
- Equipment Damage
- Observe the performance data and limits on the nameplate of the power electronics kit.